SE2200 SeriesHigh Speed, Rigidity and Productivity CNC Turning Center for next generation
The CNC Turning Center SE Series, designed with HYUNDAI WIA's engineering expertise to maximize productivity by enhancing rigidity and accuracy of machining.
Excellent Machining Performance, Y-axis CNC Turning Center
- 30° slanted one-piece bed structure with high rigidity
- Compact product size allows installation in small areas
- Improved user convenience by applying the latest controller of FANUC
- Ensured high-rigidity applying Roller guideway on all axes (X/Z-axis: 30/36m/min)
- Prepared user-oriented lineup including long-bed, mill turret and sub-spindle
- Integrated processing through synchronized control of Main/Sub spindle
- Ergonomic design for convenient access to chuck and tool
- Stabilized unit structure to minimize thermal displacement
Basic Structure
The Best Productivity 6″ / 8″ / 10″ Compact CNC Turning Center
1All-In-One Type Of Bed
Structural analysis was applied to the design of the machine to increase the tool post body and reduce the machine’s height so as to maintain the bed’s dynamic rigidity even during high-speed machining. In addition, the SE Series bed slope is pitched at 30 degrees to ensure more stable machining.
Enhanced Vibration Absorption
Thanks To Increased Ground Area
Floor Space (L×W)
Standard Bed |
2,120×1,610 mm (83.5″×63.4″) |
Long Type Bed |
2,970×1,610 mm (116.9″×63.4″) |
2High-Speed Roller LM Guideway
Linear roller guideways are applied to reduce non-cutting time and bring high rigidity.
Rigidity Has Increased 30% Compared
To The Ball Bearing LM Guide
Rapid Traverse Rate (X/Z) |
30/36 m/min (1,181/1,417 ipm) |
Travel (X/Z) |
Standard Bed |
210/340 mm (8.3″/13.4″) |
Long Type Bed |
210/560 mm (8.3″/22″) |
3Wedge Type Y-Axis Structure
Y-axis additional type is designed with a wedge type Y-axis that is transferred by the simultaneous operation of the Ys-axis and the X-axis. In addtion, excellent rigidity makes it possible to perform superb quality when machining a high-accuracy machining.
Y-axis Rapid Traverse Rate |
10 m/min (394 ipm) |
Y-axis Travel |
110 {±55} mm (4.3″) |
4SE Series Line-Up
● : Standard ○ : Option
Spindle & Turret
Heavy Duty Cutting & High Accuracy
16”/8” Main Spindle
The main spindle is designed with the same structure often found in larger sized machines. The combination of double cylindrical roller bearings and angular contact ball bearings leads to excellent heavy duty cutting performance. Also, machining performance is enhanced by applying ribstar belt to minimize noise and belt slipping problems.
Ribstar Belt
Applied the ribstar belt to minimize the slip and noise of the belt during processing, and this improvement enhanced performance of the work.
Labyrinth Structure
Increased processing stability by minimizing bearing damage caused by inflow of the oil.
C-Axis Control
C-axis of SE Series can be controlled to 0.001° which makes it possible to process various shapes.
25″ Sub Spindle(‘S’ Type)
The Belt-type sub spindle is designed to minimize thermal displacement during the continuous machining, offering from the heavy-duty cutting to the high-speed machining.
When the main spindle cutting is completed, the sub spindle rotation is synchronized with the main spindle allowing the workpiece to be transferred to the sub spindle, and machining can begin on the back side of the workpiece.
Spindle Specifications
3Servo Turret
The turret of SE series is applied with high performance AC servo motor, improving machining reliability. 3-piece coupling shows excellent performance in indexing. Powerful hydraulic tool clamping minimizes tool tip deviation caused by load.
20Bar(290 psi) High Pressure Coolant OPTION
Turret is designed to utilize 20 bar (290 psi) high pressure coolant and it shows optimum performance in machining difficult-to-cut material.
4BMT45 Turret (Mill Turret)
The BMT turret secures the tool with four bolts and key on the tool mounting surface of the turret, making it possible to powerfully fix the tool, ensuring high reliability in rigidity and precision.
Mill Tool Holder
Machining capability has increased with the addition of straight milling head tool holder.
STRAIGHT MILLING HEAD |
ANGULAR MILLING HEAD |
|
|
Increased Rotating Tools
Straight and angular milling haed 1ea >
2ea, respectively
Special Tool
The SE series can process high value-added products using a variety of rotating tools. In particular, there is a multi-holder for attaching a variety of tools to one holder, and an eccentric rotary tool for handling eccentric parts without additional axis travel, which can realize integration of process with one machine.
FANUC 0i-PLUS
Touch-type 15 ″ large monitor controller maximizes customer convenience / productivity
15″ Touch-type Monitor as a Standard
Smart Machine Control |
Fast Cycle Time Technology |
Fine Surface Technology |
Smart Servo Control Technology |
Conversational Program |
SmartGuide-i |
i-HMI |
Machining-aid Function |
Part Program Storage |
5120M (2MB) |
No. of Registerable Programs |
1000 EA |